The 10 First Industrial Hazards PCs.
Computers are fragile: Yet more and more computers are used in environments that are aggressive for the PC. Many administrators discover it more profitable to use cheap PC that will not last long rather than buying PCs Industrial.
You can discover a compromise in the form of a rack systems that offer the same protection as Industrial PC for a fraction of the cost. This will allow a computer standard as long while offering the same flexibility as Industrial PCs, especially when i
t comes to expanding the area of employment and make repairs.
The top 10 dangers of industrial PCs are:
10. Errors of use: These errors may be related to a bad connection or deliberately skip the scandisk. A user can seriously damage the hardware, especially processors and disks if you do not follow the advice for these machines.
9. Manufacturing wrong - years ago there were only a few companies that produce PCs. Now, there are manufacturers and assemblers to infinity: some of them with experience and vast resources while others consist of two people. So it's not surprising that an increasing number of systems are wrong to buy.
8. Poor broad field of employment. The computers are not the only ones to suffer from poor manufacturing: the scope of their employment by labor inexperienced can cause dramatic problems and defects such as RAM can directly destroy a processor. Try to "overclock" the processor can frequently melt s
rocessor can frequently melt system in a way fatal.
7. Incidents on USB. Today, it connects on USB. However, it may happen that your USB device is not operating system you use or is wrong, this leading to a fatal short circuit.
6. Boost / cut. Of overload or power outages could cause an unexpected loss of data but can also heat a processor, making it unusable. It is not only the power grids that cause problems, lightning can rush through the cables (even the son of phone), so your system calcining and electricity s'amasse can cause problems similar.
5. The dirt / dust. A dusty clog a computer and block courtyards which will heat the computer. The dust can also contain conductive materials and particles can stick to the circuit boards and cause a short circuit. A cloud of dust can explode if it comes into contact with an ignition source (like a computer). Even personal computers that are not properly cleaned can succumb to problems caused by dust.
4. The water / fluids. Of course, computers are like all electrical and electrical equipment, computers and water do not mix. Suffice it to overturn a cup of coffee and this could be the death of your PC.
3. Heat. Processors may exceptionally warm and the cooling system of a computer is inadequate (because the machine has not been extended, has not been overclockée or is cluttered by dust and dirt), it will only matter of time before he does any more.
2. The cold. As well as heat, computers do not like the cold either. Processors will not work at all if the operating temperature is too low because condensation inside the machine will freeze and expand, this damaging the processor and electronic parts.
1. Shots / physical shock. The computers are machines susceptible, the very fact of carrying a PC from one room to another can cause damage because it disturbs circuits and disk drives, which are sensitive.If you dropped a computer or if the computer receives a severe shock, circuits and processors will be damaged or the connection will be moved.